"Your Local Source for Gases, Welding Equipment, and More..."
Hours of Operation
M-F7:30 AM - 5:00 PM
Sat8:00 AM - 12:30 PM

Millermatic 211 W/ Running Gear

Call for Price

SKU: 951603 Categories: , Brand:


Auto Set

A breakthrough control that automatically sets your welder to the proper parameters. Auto-Set offers all-in-one MIG minus the guesswork! Simply set the wire diameter, set the material thickness and start welding!

Welds Thickest Material in its Class!

The Millermatic® 211 Auto-Set with MVP has the highest output in its class. It can weld from 24 ga – 3/8 in. (0.8 – 9.5 mm) mild steel in a single pass on 230 V.


This technology provides a smooth spatter-free start. It’s the best-starting machine in the small MIG machine category! No pop gun starts and virtually no spatter to clean up.

Durable Cast Aluminum Drive System

Incorporates dual-groove quick-change drive roll and spring-loaded tension arm with calibrated tension knob, all designed to make set up easier and faster.

Manual Mode

Gives you the flexibility to manually set the machine when welding aluminum, stainless steel or anytime you want to set your own parameters on mild steel.

Spool Gun Ready Out of the Box!

Finally a reliable and economical way to weld aluminum. Hooked up to a Millermatic® 211 Auto-Set with MVP, the new Spoolmate™ 100 Series spool gun allows you to weld from 18 ga – 3/8 in. aluminum. Gun sold seperate.

Multi-Voltage Plug (MVP™)

Multi-Voltage Plug allows you to connect to common 120 or 240 V power receptacles without the use of any tools – simply choose the plug that fits the receptacle and connect it to the power cord.

‘Tip Saver™’ Short Circuit Protection

Shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. Trigger reset permits quick reset at gun rather than at the machine.
Processes MIG (GMAW)
Flux Cored (FCAW)
Material Type
General specifications Input Power
230 V, 25 A, 60 Hz, 1-Phase
120 V, 20 A, 60 Hz, 1-Phase
Rated Output

150 Amps at 23.5 VDC, 30% duty cycle (230 V)

90 Amps at 20 VDC, 20% duty cycle (120 V)


Welding Amperage Range
30 – 210 Amps
Wire Speed
60 – 460 IPM (1.5 – 11.7 m/min)
Net Weight 74lb (33.6 kg)
WireDiameter Capacity
.023 – .035 in (0.6 – 0.9 mm) Solid Steel
.023 – .035 in (0.6 – 0.9 mm) Stainless
.030 – .045 in (0.8 – 1.1 mm) Flux Cored
MaxSpoolSize Capacity
8 in (203 mm)
Applications Aluminum Welding
Farm and Ranch
Field Maintenance and Repair
Metal Art/Sculpture
Motorsports (car, truck, bike, etc.)
Welding Projects
Spool Gun Option SPOOLMATE 100 SERIES


Comes complete with

  • Millermatic® 211 MIG Welding Power source
  • 6 ft (1.8 m) power cord and MVP™ plugs
  • 10 ft (3 m) M-100 MIG gun and cable assembly
  • 10 ft (3 m) work cable and clamp
  • Smith® Argon and AR/CO2 mix regulator/flow gauge with hose
  • Spool of Hobart® .030 in (0.8 mm) solid wire
  • Two contact tips for .030 in (0.8 mm) wire and two contact tips for .035 in (0.9 mm) wire
  • Dual groove quick-change drive roll for .024 in (0.6 mm) or .030/.035 in (0.8/0.9 mm) wire
  • Factory-installed gas solenoid valve
  • Information/settings chart
  • Material thickness gauge (#229 895)
  • 301239 running gear/cylinder rack


Additional information


Steel, Stainless, Aluminum

Current Type


Amperage Range

<100, 100 – 200, 200 – 300

Capacity Range

14g, 3/16", 1/4", 3/8", 5/16"

Input Voltage

110/115/120V, 220/230/240V


1 – Phase

Output Mode



There are no reviews yet.

Be the first to review “Millermatic 211 W/ Running Gear”

Your email address will not be published.

Pin It on Pinterest

Please fill out the information below to see our Cylinder Exchange Policy Information

  • This field is for validation purposes and should be left unchanged.